How to change the calibration parameters of the FLU?
Calibration parameters of the Flexible Logic Unit (FLU) are stored inside the DPRAM.
Use the genertaed file ram_logger.csv to get the offset address of the parameters you want to change e.g. Ki and Kp.
Open a memory window at address 0x60000000 (base address of the DPRAM) in your debugger and change the Ki and Kp as wanted.
Then in the APB FLU slave, in register CR set the bit 2 for the calibration to be applied on the FLU algorithm: Open a memory window at address 0xC4074000 and write at offset 0x60 the value 0x4.
Related Posts
Event November 6, 2024
Join us at ELECTRONICA 2024
Discover the Adaptive Control Solution at B6-400 with Intel Automotive The ACU T222 and ACU U310 chips, combined with...
Blog October 21, 2024
ISO 9001-2015 Certification
Certified ISO 9001:2015 We are thrilled to announce that Silicon Mobility has, once again, renewed its ISO 9001:2015 certification...
Event September 12, 2024
Join us for a live webinar on Sep 19th, 2024
Join us for a live webinar Sep 19th, 2024, 11:45 am EDT (17.45 pm UTC) Topics of the webinar:...
